Z9 display setting
Feb 7, 2024 12:35:55 #
I own 2 Z9 bodies, both purchased from B&H, 14 months apart from each other, both have been updated with the latest firmware (4.10). My goal is to match each body with the same display, one of the Z9’s when powered up offers a “live” view of the scene (I prefer this display setting). The other Z9 display when powered up, the preferred setting is not an option or available, I’m unable to locate that setting. Menu to menu, the settings are identical on each body. Any ideas for locating my preferred display setting are welcome.
Feb 7, 2024 13:07:45 #
Feb 8, 2024 05:51:02 #
gmar3180
Loc: Waxahachie, TX
Toggle the DISP button to see if this fixes the issue. I assume you've saved the settings from the good one and loaded those settings in the other one since you mentioned that the settings are identical.
Feb 8, 2024 08:15:43 #
billnikon
Loc: Pennsylvania/Ohio/Florida/Maui/Oregon/Vermont
MHenny wrote:
I own 2 Z9 bodies, both purchased from B&H, 14... (show quote)
Go to the custom settings menu and you will find that there they do not match.
Feb 8, 2024 09:48:21 #
No luck, went to Custom settings menu and both bodies have matched settings, when I toggle through the display settings, I have just one option to select from (display #5), whereas the other body I’m able to toggle through and select up to 5 different display settings. The body that is only allowing one option to display does allow me 5 options when I switch to video mode. Very strange.
Feb 8, 2024 12:02:51 #
gmar3180
Loc: Waxahachie, TX
Save the settings from the camera that works find and load them into the other one. Otherwise, a camera reset is another option.
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.