Lens hood removal
Aug 25, 2020 12:23:26 #
Just search 'super glue remover/debonder'. Should find on ebay. Careful not to get any solvents on front of lens!!
Aug 25, 2020 14:59:44 #
Aug 25, 2020 15:09:47 #
Lilka wrote:
In a moment of desperation and stupidity, while trying to attach a lens cover holder to the cap, I turn to crazy glue. The lens cover holder, or whatever the proper term is, works really well now. The downside is that a drop of the crazy glue attached my lens hood to the camera. I have tried acetone and other methods to remove the hood to no avail. Any suggestions?
Acetone is the correct chemical, but how big a drop got between the lens hood and the lens, how thick the crazy glue is (old stuff was like water, new formulations are thicker, like glue), and how much of the lens hood and lens are actually bonded will have some impact on your success. Since acetone flows easily, I would apply it with a toothpick or a 20/0 spotting brush (stiff bristles, more precise than a regular brush)
https://www.dickblick.com/items/06084-1020/
This will get the acetone exactly where you want it and if you don't overload the brush and you've learned your lesson from the crazy glue episode, you'll avoid getting the acetone where you don't want it. Good Luck!
Aug 25, 2020 15:20:52 #
Aug 25, 2020 18:04:25 #
Thank you, almost all, for your comments & suggestions. The photo cap keeper holder is now solidly attached to my bridge camera.
Aug 25, 2020 18:38:58 #
I have used Dremels for decades and they are very useful. It is also very easy for an inexperienced user to do considerable damage very quickly! Tread carefully if you must go this route.
Aug 25, 2020 18:56:15 #
Lilka wrote:
In a moment of desperation and stupidity, while trying to attach a lens cover holder to the cap, I turn to crazy glue. The lens cover holder, or whatever the proper term is, works really well now. The downside is that a drop of the crazy glue attached my lens hood to the camera. I have tried acetone and other methods to remove the hood to no avail. Any suggestions?
The purpose of Crazy Glue is to attach fingers together. On occasion it will stick to stuff to frustrate the mess out of you. A razor blade or better an X-Acto knife may work. If in the worst case scenario, I may take it to a reputable camera repair shop. If you can’t get it undone, you may damage the lens and void the warranty if it is still in force.
Happy Shotting!
Aug 26, 2020 10:12:50 #
sagittta
Loc: In the woods of Michigan
I build and fly radio controlled sailplanes and have using super glues for close to 40+. (Yes, I have glued my fingers together before.) If you can find one go to hobby shop (or online) and get a debonder which is made to remove superglue joints. It takes time but it does work. It is better for you then acetone, which can get through your skin (not good for your lungs either).
Aug 26, 2020 13:15:39 #
All, thank you for most of your responses and suggestions. Yes I would not normally admit to doing such a foolish thing. However it helps that you don't know me. To hopefully clarify: I used crazy glue to attach photo lens cap keeper to lens cover because it would not stay attached & new covers are expensive, especially if you lose a lot of them.The lens hood was properly attached to the lens. A drop of glue connected (permanently?)the two. Have tried commercial acetone, exacto knife, needle to no avail. Have not tried pliers or dremel because, as you so correctly stated, I'm dangerous. No photography stores near me. Not the end of the world if it is permanently attached. However, it does take up more room in camera bag and may lessen the value or discourage a sale.
Aug 26, 2020 14:51:19 #
billnikon
Loc: Pennsylvania/Ohio/Florida/Maui/Oregon/Vermont
Lilka wrote:
All, thank you for most of your responses and sugg... (show quote)
1-800-645-6687 will answer your needs.
Aug 26, 2020 16:05:07 #
Aug 26, 2020 16:48:48 #
LFingar wrote:
On second thought, considering what was already accomplished with a tube of glue, power tools may not be a good idea! 
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.