stevetassi wrote:
I have a Nikon D750 and am looking for a remote shutter release. I would prefer a wireless solution. Any recommendations? Which ones should I avoid?
Thank you.
You have several options, some of which will depend upon whether you use external flash and which flash you use.
First, there is the Nikon ML-L3. It is an infrared remote, so you need to be near your camera and in line of sight to the sensor. These are very inexpensive, especially used. I recommend getting one even if you opt for a more expensive radio trigger. They're just very convenient. You will want to go into the menus and increase the timeout time; the default is frustratingly short. In fact, I put that menu item in My Menu for quick access.
Second, there is the Nikon WR-T10/WR-R10 trigger. This will be my favourite, because it doesn't require you to run a cable to a box that you then mount on your hot shoe (so you can use the hot shoe for a flash if you so desire). It's the smallest I know of, as well. And, if you get a professional Nikon camera, you can buy the WR-A10 adapter which allows mounting of the trigger on the front of the camera (away from where an L-bracket would go). Or get the appropriate cable for your trigger which mounts on the hot shoe...
There are radio triggers that just trigger the shutter (although some may add timelapse, bulb, or other options). These are generally large and I don't use the ones I do have, because I like the dual use of a trigger that will remote fire a flash.
So, the radio triggers that trigger the shutter or trigger a remote flash are quite convenient. The transmitter mounts on the hot shoe for remote flash triggering, or you hold it in your hand and mount the receiver on the hot shoe and run a cable to the remote shutter port on the camera. Of these, you can get a simple type that does not support TTL (I have Pixel Soldiers, for example), a more complex type that supports remote power setting of some flashes (I have the Cactus V6 transcievers, for example), or even more complex type that supports remote TTL (I have the Cactus V6 II transcievers, for example).
So the choice of radio trigger can be influenced by what you want to do with an external flash. You can get a simple flash trigger, set the flash to Auto mode by manually setting your aperture and ISO on the flash, and then get automatic exposure from the flash. These triggers are smaller, so my default is to carry them if I'm taking my camera brand flash with me.
Or you can get a flash trigger that supports remote power management. The Cactus V6 will work with nearly any flash that has analog TTL capability. You need two; they are transceivers so you can pick whichever you want as the transmitter. I use these for remote studio work, so often take several along with the appropriate flashes. The disadvantage to these are that they are rather large.
Or you can get a flash trigger that supports remote TTL. In this case, you will want to decide on your flash system, because that will dictate which remote triggers you get. Or, you can consider the Cactus V6 II, which can be set up with the appropriate firmware to support most camera flash protocols. I use the Cactus V6 II with Olympus and Nikon flashes, as well as Cactus flashes. These are the same size as the Cactus V6, so they are a bit large. Again, to use them as a remote shutter trigger you need two.