Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
Question about lens hoods
Sep 23, 2012 16:51:24   #
RWCRNC Loc: Pennsylvania
 
I have read a few threads here about lens hoods. If I understand correctly, if the hood is properly attached to the lens, you should not see parts of the hood in your photo. Is this correct?

Reply
Sep 23, 2012 16:53:09   #
CaptainC Loc: Colorado, south of Denver
 
Yes.

Reply
Sep 23, 2012 17:52:50   #
Festina Lente Loc: Florida & Missouri
 
RWCRNC wrote:
I have read a few threads here about lens hoods. If I understand correctly, if the hood is properly attached to the lens, you should not see parts of the hood in your photo. Is this correct?

Yes.
But with a few caveats:
IF you have the right hood for the lens
IF you don't have more than one lens filter installed (varies, especially true with wide angle lenses)
IF it is a tulip lens hood (for a very wide angle lens) that it is oriented correctly (most cameras will only let you install it one way,... but not all....)

Reply
 
 
Sep 23, 2012 19:20:59   #
LoneRangeFinder Loc: Left field
 
Festina Lente wrote:
RWCRNC wrote:
I have read a few threads here about lens hoods. If I understand correctly, if the hood is properly attached to the lens, you should not see parts of the hood in your photo. Is this correct?

Yes.
But with a few caveats:
IF you have the right hood for the lens
IF you don't have more than one lens filter installed (varies, especially true with wide angle lenses)
IF it is a tulip lens hood (for a very wide angle lens) that it is oriented correctly (most cameras will only let you install it one way,... but not all....)
quote=RWCRNC I have read a few threads here about... (show quote)


I'd like to know which lenses actually attach the hood onto the front of the filter. These must be those rubber hoods, correct? As far as I know, all Nikkors hoods bayonet to the lens and stacked filters would protrude inside the hood-- but would not extend the hood from the front of the lens. Is this not so with Canon as well? I've seen this comment several times-- and I'm curious if Pentax, Canon, Sony, et. al attach to the filter directly.

Reply
Sep 24, 2012 04:40:55   #
Festina Lente Loc: Florida & Missouri
 
LoneRangeFinder wrote:
Festina Lente wrote:
RWCRNC wrote:
I have read a few threads here about lens hoods. If I understand correctly, if the hood is properly attached to the lens, you should not see parts of the hood in your photo. Is this correct?
Yes.
But with a few caveats:
IF you have the right hood for the lens
IF you don't have more than one lens filter installed (varies, especially true with wide angle lenses)
IF it is a tulip lens hood (for a very wide angle lens) that it is oriented correctly (most cameras will only let you install it one way,... but not all....)
quote=RWCRNC I have read a few threads here about... (show quote)

I'd like to know which lenses actually attach the hood onto the front of the filter. These must be those rubber hoods, correct? As far as I know, all Nikkors hoods bayonet to the lens and stacked filters would protrude inside the hood-- but would not extend the hood from the front of the lens. Is this not so with Canon as well? I've seen this comment several times-- and I'm curious if Pentax, Canon, Sony, et. al attach to the filter directly.
quote=Festina Lente quote=RWCRNC I have read a f... (show quote)

I can only speak with any certainty for Canon, and I'm not aware of any Canon DSLR lenses with a hood that attach to a lens filter. I'm reasonably certain that the same is true for Nikon and Pentax.
However, filter stacking on some lenses will cause mechanical vignetting which is sometimes incorrectly blamed on the lens hood.

Reply
Sep 24, 2012 10:01:23   #
steve48 Loc: Richmond, Texas
 
Here is another caveat. If you are using your pop-up flash instead of a flash on camera you can get a lens hood shadow at wide angle settings. For example, on my 18-70mm Nikkor or my 18-270mm Tamron lens, I see a shadow if the lens is set at 18-22mm, but not after that. With the lens hood off, no shadows from the popup flash.

Reply
Sep 24, 2012 11:05:51   #
RWCRNC Loc: Pennsylvania
 
Thank you one and all for your speedy replies.

Reply
 
 
Sep 24, 2012 13:09:28   #
Festina Lente Loc: Florida & Missouri
 
steve48 wrote:
Here is another caveat. If you are using your pop-up flash instead of a flash on camera you can get a lens hood shadow at wide angle settings. For example, on my 18-70mm Nikkor or my 18-270mm Tamron lens, I see a shadow if the lens is set at 18-22mm, but not after that. With the lens hood off, no shadows from the popup flash.
Good point. Another reason to try to use off camera axis flash whenever possible.

Reply
Sep 24, 2012 15:16:41   #
Daryl New Loc: Wellington,New Zealand
 
See my comments in previous Topic....

Reply
Sep 24, 2012 20:59:04   #
exitvisa Loc: richmond bc
 
All of my canon lenses have a filter attached and a hood attached (by thread,58mm etc.) and a hood threaded onto it.

Reply
Sep 24, 2012 21:36:47   #
sirlensalot Loc: Arizona
 
I have gotten small dark areas on both canon and pentax kit lenses on some shots with flash. Pentax had factory hood, canon had after market collapsible rubber hood. Not large. Was able to crop out. Maybe me, maybe not.

Reply
 
 
Sep 25, 2012 10:04:25   #
Drigby1 Loc: American Fork, UT
 
Anyone use a lens hood with a point and shoot like a Canon SX40?

Reply
Sep 27, 2012 10:32:29   #
Festina Lente Loc: Florida & Missouri
 
exitvisa wrote:
All of my canon lenses have a filter attached and a hood attached (by thread,58mm etc.) and a hood threaded onto it.
If you look closer, I believe you will find that the lens hood attaches to the outside of the lens while the lens filter screws on inside the lens barrel.
The hood and fileter are independently attached on all the Canon lenses that I own (about 14 lenses).

The Cokin filter system is a different animal however....

Reply
Sep 27, 2012 10:35:48   #
Festina Lente Loc: Florida & Missouri
 
Drigby1 wrote:
Anyone use a lens hood with a point and shoot like a Canon SX40?
Hard to do on most point & shoot (P&S) models.
The easiest approach for a P&S lens hood is to use your hand or something else to block the sun from entering the lens at an angle.
You just have to be more aware of the potential for lens flare from the sun and other strong light sources not directly in your field of view.

Reply
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.