tcthome wrote:
What grease did you use. I have that problem on a cheap promaster gimbal. Left the gimbal in back of the seat in my truck all summer, Temp on the mirror says 114*F when I open the door. Some of the grease leaked out & now it doesn't turn as easy & smooth as it use to. Was thinking of using a ball bearing grease made by Exon. Thanks for any response in advance!
I used TSL EP-2 grease. Dropping point 260 degrees Celcius.
Other brands will be supplying this grease as well. just mind the dropping point...
The dampening effect will be gone. Proper balancing prior to using it is (and was) important. In return you get a very smooth operating Gimbal head. You can adjust the friction internally. Make sure you use Loctite once you found the proper friction. You can open the Gimbal head by putting a strong suction cup on the logo plate (or use decent double sided tape and the lid of a tiny spray can upside down) and pull on one side. The logo plate will come off easily without damage.