Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
Cleaning Mirrorless and Rangefinder Sensors
Jul 15, 2017 14:54:17   #
bylinecl
 
Anyone have any tips on a small vacuum tool for cleaning off sensors and related area?

Reply
Jul 15, 2017 15:29:30   #
Ched49 Loc: Pittsburgh, Pa.
 
I have read once for fixed lens cameras, Extend the camera lens to the maximum zoom then put the end of the vacuum hose over the lens for a few seconds while vacuum is on.

Reply
Jul 15, 2017 15:55:24   #
burkphoto Loc: High Point, NC
 
bylinecl wrote:
Anyone have any tips on a small vacuum tool for cleaning off sensors and related area?


Sensor Swabs and Eclipse Fluid. Watch the movie at:

http://photosol.com

You don't want to touch the sensor surface with anything that isn't specifically engineered to clean it. A blower bulb (Rocket Bulb) can knock off surface dust. The sensor is mildly charged with static electricity. So unfortunately, over time, greasy bits of lubricant and metal shavings from the lens, and dust that enters the camera while you change lenses, will get on the sensor and stick to it. A cleaning with a Sensor Swab and 90 to 99% pure, filtered methanol (Eclipse fluid) will usually remove the gunk. You may have to do it twice. Watch the video and follow instructions carefully. Be sure to download and read the MSDS (Material Safety Data Sheet), as methanol is a nasty poison.

Reply
 
 
Jul 15, 2017 16:57:58   #
bylinecl
 
Sorry, something was omitted from my original post i.e. For mirrorless and rangefinder bodies, but thanks anyhow--
Cl/

Reply
Jul 15, 2017 18:03:35   #
bylinecl
 
That reply was for cjkoprb, but I screwed up. So thanks, Burke Photo. Good gen. Ordered the kit. cl/

Reply
Jul 16, 2017 07:59:35   #
ole sarg Loc: south florida
 
All sorts of demos on utine

Reply
Jul 16, 2017 08:30:05   #
bylinecl
 
Yes, there are. And so, thanks again. The suggestion to keep continuing to collect "good gen" is much appreciated. Time's short and knowledge's elusive.

Reply
 
 
Jul 16, 2017 09:12:33   #
martinfisherphoto Loc: Lake Placid Florida
 
I used a vacuum Once for trying to pull dust out of my camera.. The problem was it Pulled tons more dust in from the surrounding area that attached to the sensor... I thought it was a great simply solution to my problems, but sometimes I have to learn the hard way.. Took several hours to clean the recommended way. I'll stick to proven methods from here on out.....

Reply
Jul 17, 2017 15:16:26   #
bylinecl
 
Yes, well, it was a good idea but too large a nozzle --- perhaps?

Reply
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.