As a rule I shoot in manual and a occasion I use Aperture with a flash outdoor and indoor, I use Shutter speed outdoors if the lighting is good or for sports without a flash.
As I am older, I decided to try and use Shutter speed with a flash for fill, I noticed that the camera with go to the widest F stop, 1.8, 4 etc.
Is there something I am missing or not doing correctly to avoid this ?
I realize that common sense says that the Camera thru the lens needs to allow for maximum light, hence the reason for the wide f stop.
BUT, is there a way to get the camera to recognize that there is an active flash attached in shutter mode.
Hope I do not cause a "you are an idiot" response, I have been taking pictures for over 60 years and it never occurred to me to figure this out.
TriX
Loc: Raleigh, NC
One option is to shoot in manual with the flash set for ETTL. Then you can set shutter speed and aperture as you wish, and the flash will adjust the light output for what the flash "thinks" is the proper exposure. You can make further adjustments to the exposure with the flash compensation if desired.
I do currently shoot in Manual with the flash set at TTL, not sure what ETTL is, I have the Nikon SB910
Thanks,
Greg
ETTL is only for Canon. For Nikon it's iTTL. To answer the OP I don't know when in P and S how the camera choose the aperture. On my old film F5 camera there was a chart and it based on the maximum aperture of the lens. On my Df (and I imagine the same for your D750) there is no chart in the manual.
When you set the shutter speed were you within the flash sync speed range? It's most likely 1/200-1/60 second or 1/250-1/60 second. I'm not sure if that could be the problem.
greg14 wrote:
As a rule I shoot in manual and a occasion I use Aperture with a flash outdoor and indoor, I use Shutter speed outdoors if the lighting is good or for sports without a flash.
As I am older, I decided to try and use Shutter speed with a flash for fill, I noticed that the camera with go to the widest F stop, 1.8, 4 etc.
Is there something I am missing or not doing correctly to avoid this ?
I realize that common sense says that the Camera thru the lens needs to allow for maximum light, hence the reason for the wide f stop.
BUT, is there a way to get the camera to recognize that there is an active flash attached in shutter mode.
Hope I do not cause a "you are an idiot" response, I have been taking pictures for over 60 years and it never occurred to me to figure this out.
As a rule I shoot in manual and a occasion I use A... (
show quote)
I never use Shutter priority mode with my d750 so I tried it with and without an external flash. It worked the same way on mine. The camera used the aperture first maximizing it at 2.8. It behaved the same way without the flash. If I lowered the shutter speed enough the aperture will change. It appears it is just the nature of the beast.
Have you tried setting the flash from ittl to manual for flash fill? For fill I usually set the flash to manual at 1/128 to 1/16 power and the camera to shoot in Manual mode. I use fill flash to brighten the subject slightly which will darken the background. First I will adjust the camera with flash off so the background brightness is where I want it. Then I turn on the flash (hi speed mode) and guess where to set the power.
(1)
Yes, I keep it within the flash Range
(2)
I rarely if ever use Manual Flash, too old and I might forget to reprogram, LLOL
You are not an idiot, that is hoe it works. To overcome this, go to manual, meter the scene, select speed and arperture and set flash to TTL.
Do you have the book? Can you just tell the OP what it is? I am curious as I don't know either. I always shoot flash with the camera in M mode but the OP question is something worth to know.
I am currently trying to figure out how to use speed flash with my new d750. I am also a brand new at photography, period. There are many youtube videos on ttl speed flash setup and use. Very helpful. Good luck.
I have the "Mastering the Nikon D750" by Darrell Young from NikoniansPress
I will reread it when I get a chance.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.