I found some slides from 1972 and was wondering if and how they can be changed to digital copies? Or just plain hard copy photos?
Gene51
Loc: Yonkers, NY, now in LSD (LowerSlowerDelaware)
sinead wrote:
I found some slides from 1972 and was wondering if and how they can be changed to digital copies? Or just plain hard copy photos?
Either scan them yourself or send them out to be scanned.
byjoe
Loc: Stillwater, OK
I took about 100 to Sam's Photo Center a couple of years ago and they scanned them and put them on a disc. If I remember correctly it wasn't that expensive and about what I hoped for after so many years.
This is how I do it cheep and easy
Can't get good result if your slide is not flat.
Thanks. I'll try to scan. I didn't know I could scan those. If it doesn't work well I'll find a place that will.
sinead wrote:
I found some slides from 1972 and was wondering if and how they can be changed to digital copies? Or just plain hard copy photos?
ScanCafe does a good job.
I have scanned several thousand slides with acceptable results. I used an HP Scanjet G4050 that has a 24 slide slide tray. The all-in-one printers have a scanner that can scan 600 dpi or higher will also work. After cleaning the scanner glass each slide had to be dust free. Unless you have only a few slides anything over 600 dpi takes a very long time. I scanned all my slides at 600 dpi and save them as TIF files. I also use the scanner program dust remover and sharpening options. I then ran each slide through Photoshop. Wish I know about lightroom then.
I recently finished a restoration of old mishandled slides from as far back as the 50s. I used my flatbed scanner (not the best way) and took some files from a washed out orange/yellow color to presentable pictures. A lot of work, but what else have I got to do?
This is how I do it. Works great. The sensor in the camera is better and much faster then a scanner.
rehess
Loc: South Bend, Indiana, USA
brent46 wrote:
This is how I do it. Works great. The sensor in the camera is better and much faster then a scanner.
Yes, great for perfect slides, perhaps. Not so much for "iffy" slides, since it will capture every imperfection perfectly.
My Nikon scanner essentially scans each line 16 times, each from a different angle, so it is able to wash out surface imperfections other than those cutting into the emulsion.
sinead wrote:
I found some slides from 1972 and was wondering if and how they can be changed to digital copies? Or just plain hard copy photos?
There are many companies that do this, and it's surprisingly inexpensive. Google to find many. >Alan
any good film processor can take care of both those requests. One of the best according to many posters on this site is TheDarkRoom.Com. There was a list of about 40 film processors on the US continent floating on this site a few months ago. the darkroom.com is mentioned more than most others.
Here is their site:
https://thedarkroom.com/
steve DeMott wrote:
I have scanned several thousand slides with acceptable results. I used an HP Scanjet G4050 that has a 24 slide slide tray. The all-in-one printers have a scanner that can scan 600 dpi or higher will also work. After cleaning the scanner glass each slide had to be dust free. Unless you have only a few slides anything over 600 dpi takes a very long time. I scanned all my slides at 600 dpi and save them as TIF files. I also use the scanner program dust remover and sharpening options. I then ran each slide through Photoshop. Wish I know about lightroom then.
I have scanned several thousand slides with accept... (
show quote)
I have the same scanner. My results mirror the reviews when it was new. It is slow and has focus issues. You might have gotten a good copy of it. I'm going to replace it with an Epson when I get serious about scanning all of my old slides and negatives.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.