What Mode do you use when using flash
May 23, 2017 12:18:07 #
wpas wrote:
Used flash for my first time indoors using a Nikon... (show quote)
I use manual most of the times, when shooting any sort of action, or say, when the distance to your subject is constantly changing, then I switch to TTL, but like I said, mostly I stay away from TTL! (well I admit, in times when I'm really lazy, I do use on occasion TTL).
May 23, 2017 12:21:33 #
wpas wrote:
Ok, many of you recommend the Manual mode, but aren't you having to calculate the distance and exposure settings for every shot or because it's TTL can you just set any f-stop for the wanted depth of field and a shutter speed to Reduce the effect of any ambient light then let the TTL figure out how much light is needed for those settings?
NO. If you are using TTL (or ETTL) the flash is cut off when it has produced enough light to make a proper exposure as read Through The Lens, hence TTL.
May 23, 2017 12:46:20 #
I use Manual and pick an aperture for the DOF I want and a shutterspeed for the amount of ambient light I want to affect the exposure. On my Canon, if I pick one of the automatic modes, the camera defaults to the widest aperture, which my not provide the DOF I desire.
May 23, 2017 12:50:47 #
Since I always set my camera in M mode when using flash so I didn't pay much attention. I just checked the manual of my camera (Nikon Df) and I know how the camera selects the shutter speed in A and P modes. However, I don't know how it selects the aperture in S and P modes. My old film Nikon F5 manual did have a section outlined the rule on how the camera select the aperture. It based on ISO and maximum aperture of the lens.
May 23, 2017 14:17:43 #
I actually have a Metz Strobe like that but the dry-fit battery died and has been leaking making it all a sticky mess Ck "wallyworld" (Walmarts) sporting goods, for decoy battery >$10. Last Nikon SB800 1500 shots. Only problem is little bulky you might, like I, get a fanny pack for the battery. Used telephone recever cord 2 wires per pole as ext to battery
May 23, 2017 14:40:26 #
May 23, 2017 18:13:29 #
Camera set to manual ... shutter @ 1/200 aperture @ f/5.6 ISO @ 400. Flash set to ttl ... flash pointed up to white ceiling ... white walls
May 24, 2017 07:31:16 #
Here's your biggest problem in my opinion. The 5600 does not allow for high speed sync. So you are trapped if you are needing a fill light scenario. Otherwise for a shot when you are more interested in depth of field over movement. Shoot M or A mode and adjust flash output setting to desired output. Put the camera view mode in highlights to see if you are blowing out any areas.
May 24, 2017 11:02:10 #
I do 98% of my work in manual. My camera syncs at 1/250th, and I usually take a test shot at f8. If I'm shooting close, I'll set my ISO at 200 and consider dialing down the flash or bouncing, whereupon I might open up a stop or adjust the ISO. If money is no object, there are flash meters available. I also meter a gray card with a color temp meter ap on my phone and set the white balance accordingly. If I'm in a hurry or will have multiple lighting situations, I'll set the WB to auto and fix in post if necessary.
May 24, 2017 20:59:31 #
I use manual and set the flash intensity for what is needed based on a few test shots. I do the same when using the pop up flash.
May 25, 2017 18:28:46 #
May 25, 2017 19:09:20 #
wpas wrote:
Used flash for my first time indoors using a Nikon... (show quote)
If indoors use M. outdoors with changing light A. The shutter opens exposing ambient light and at the end of the opening the flash goes off to add light to the subject not the background.
May 26, 2017 14:28:22 #
wpas wrote:
Used flash for my first time indoors using a Nikon... (show quote)
Adorama made this yesterday you might like it
https://youtu.be/fypbhgyJCzs
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.