My Canon 20D built in flash unit suddenly stopped working. I made two successful flash shots and then "boom" it no longer worked. Same in manual or auto. The flash button on the side of the camera won't release the flash. The Camera is 5+ years old and has never had problems..Any ideas? I checked all the setting..put in fresh battery etc.
Hi gandy, and welcome to the UHH. I don't have an answer for you, but someone on this site will be able to help you.
JimH
Loc: Western South Jersey, USA
I don't mean to appear cynical, but consider that a godsend. Built-in flashes are notoriously crappy. If you use flash a lot, get a dedicated unit that attaches to your hotshoe, and has more flexibility. Your subjects will thank you, your pictures will turn out better (probably) and, best of all, you'll look more professional. :)
Welcome, don't know the answer to your ??? hoping someone else does and will respond...post some photo soon!!!
What mode are you using? Flash won't open in some of them.
used all modes as well as manual....button to release flash in manual will not work either
GW
Loc: Idaho
I too have a 20D ,twice it has done the same thing, all I did was while pressing the flash release I GENTLY lifted on the flash, an sucess . Mine seems to do this when it has not been used for a while. Don't know if this will help,best of luck to you ...
Up on top of the Forum, hit the SEARCH button and search ERRANT CANON FLASH. Should bring up the thread which has a detailed descrption of what CANON recommends to resolve a sticking flash unit. It is a question about a 7D but should help you as well. Hope this helps!
The best help you can get is call Canon, they back what they sell. And you talk to real people.
Thanks all....emailed Canon repair...will talk to tech "During regular business hours". They have a program to "Upgrade" to refurbished 7D..if repair cost are high...
Thanks again
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.