Our city is in the process of building a huge new library, first new one here since 1898. I was commissioned to do a series of panoramas of the city to display in the new facility. I just finished the first one and printed it last night. The print is 18" x 78" in size. I had to remove a sliding closet door and lay it across the kitchen counter for a drying table. I hope this image comes through.
MT Shooter wrote:
Our city is in the process of building a huge new library, first new one here since 1898. I was commissioned to do a series of panoramas of the city to display in the new facility. I just finished the first one and printed it last night. The print is 18" x 78" in size. I had to remove a sliding closet door and lay it across the kitchen counter for a drying table. I hope this image comes through.
Congratulations on the new library and commission. Your first pano looks interesting. Are you going to do a full 360 from what appears to be a high vantage point that your first photo was taken from?
Db7423 wrote:
MT Shooter wrote:
Our city is in the process of building a huge new library, first new one here since 1898. I was commissioned to do a series of panoramas of the city to display in the new facility. I just finished the first one and printed it last night. The print is 18" x 78" in size. I had to remove a sliding closet door and lay it across the kitchen counter for a drying table. I hope this image comes through.
Congratulations on the new library and commission. Your first pano looks interesting. Are you going to do a full 360 from what appears to be a high vantage point that your first photo was taken from?
quote=MT Shooter Our city is in the process of bu... (
show quote)
No. I will be doing another 180 degree pano from the same vantage point in the Spring, and then a third sometime next winter when there is snow on the ground to give 3 different looks.
You said "drying table." Did you print it yourself? What. Kind of equipment do you have at home? What camera. & lens did you use?
PS. GREAT work!
DJM
MT Shooter wrote:
Db7423 wrote:
MT Shooter wrote:
Our city is in the process of building a huge new library, first new one here since 1898. I was commissioned to do a series of panoramas of the city to display in the new facility. I just finished the first one and printed it last night. The print is 18" x 78" in size. I had to remove a sliding closet door and lay it across the kitchen counter for a drying table. I hope this image comes through.
Congratulations on the new library and commission. Your first pano looks interesting. Are you going to do a full 360 from what appears to be a high vantage point that your first photo was taken from?
quote=MT Shooter Our city is in the process of bu... (
show quote)
No. I will be doing another 180 degree pano from the same vantage point in the Spring, and then a third sometime next winter when there is snow on the ground to give 3 different looks.
quote=Db7423 quote=MT Shooter Our city is in the... (
show quote)
Neat, looking again at your first photo maybe I should have guessed this. Showing the same scene in different seasons, lighting etc can be very interesting and dramatic.
Well done, and please post the others!
djmills wrote:
You said "drying table." Did you print it yourself? What. Kind of equipment do you have at home? What camera. & lens did you use?
PS. GREAT work!
DJM
Yes, I do all my large prints at home. I use a HP130NR printer. Images were shot in JPG Basic with a Nikon D800E and a Sigma 24-70mm F2.8 lens at 24mm and F22.
The JPG basic was used for file size, they come out 103MB on the D800E. After processing the 4 shots into the panorama the finished file size of the Pano JPG was 347MB. It took almost 20 minutes to make the print on HP Premium Satin roll paper using HP Vivera inks.
MT Shooter wrote:
djmills wrote:
You said "drying table." Did you print it yourself? What. Kind of equipment do you have at home? What camera. & lens did you use?
PS. GREAT work!
DJM
Yes, I do all my large prints at home. I use a HP130NR printer. Images were shot in JPG Basic with a Nikon D800E and a Sigma 24-70mm F2.8 lens at 24mm and F22.
The JPG basic was used for file size, they come out 103MB on the D800E. After processing the 4 shots into the panorama the finished file size of the Pano JPG was 347MB. It took almost 20 minutes to make the print on HP Premium Satin roll paper using HP Vivera inks.
quote=djmills You said "drying table." ... (
show quote)
So these were stitched then?
That's one heck of a tall ladder you used!
GoofyNewfie wrote:
MT Shooter wrote:
djmills wrote:
You said "drying table." Did you print it yourself? What. Kind of equipment do you have at home? What camera. & lens did you use?
PS. GREAT work!
DJM
Yes, I do all my large prints at home. I use a HP130NR printer. Images were shot in JPG Basic with a Nikon D800E and a Sigma 24-70mm F2.8 lens at 24mm and F22.
The JPG basic was used for file size, they come out 103MB on the D800E. After processing the 4 shots into the panorama the finished file size of the Pano JPG was 347MB. It took almost 20 minutes to make the print on HP Premium Satin roll paper using HP Vivera inks.
quote=djmills You said "drying table." ... (
show quote)
So these were stitched then?
That's one heck of a tall ladder you used!
quote=MT Shooter quote=djmills You said "dr... (
show quote)
Stitched using ArcSoft's Panorama Maker Pro 5. I downloaded the free version to play with, then bought the $19.95 version when I got this gig. I tried Microsoft ICE, but it took over 1/2 hour to stitch my first attempt, and the ArcSoft free product did it in about a minute using the same originals. The Pro version resolved the pano in exactly 11 seconds.
Billings is hemmed in by sandstone cliffs over half way around it, I was on top of the cliff to the East just after sunrise for this set. I did use a CPL on these shots, was not sure it would work, but I liked the base images better than the same set shot without the CPL, it really brought out the blue sky reflection in the river. I also had a UV filter on to help with the early morning haze, it was only 38 degrees out there, and a bit breezy!
MT Shooter wrote:
GoofyNewfie wrote:
MT Shooter wrote:
djmills wrote:
You said "drying table." Did you print it yourself? What. Kind of equipment do you have at home? What camera. & lens did you use?
PS. GREAT work!
DJM
Yes, I do all my large prints at home. I use a HP130NR printer. Images were shot in JPG Basic with a Nikon D800E and a Sigma 24-70mm F2.8 lens at 24mm and F22.
The JPG basic was used for file size, they come out 103MB on the D800E. After processing the 4 shots into the panorama the finished file size of the Pano JPG was 347MB. It took almost 20 minutes to make the print on HP Premium Satin roll paper using HP Vivera inks.
quote=djmills You said "drying table." ... (
show quote)
So these were stitched then?
That's one heck of a tall ladder you used!
quote=MT Shooter quote=djmills You said "dr... (
show quote)
Stitched using ArcSoft's Panorama Maker Pro 5. I downloaded the free version to play with, then bought the $19.95 version when I got this gig. I tried Microsoft ICE, but it took over 1/2 hour to stitch my first attempt, and the ArcSoft free product did it in about a minute using the same originals. The Pro version resolved the pano in exactly 11 seconds.
Billings is hemmed in by sandstone cliffs over half way around it, I was on top of the cliff to the East just after sunrise for this set. I did use a CPL on these shots, was not sure it would work, but I liked the base images better than the same set shot without the CPL, it really brought out the blue sky reflection in the river. I also had a UV filter on to help with the early morning haze, it was only 38 degrees out there, and a bit breezy!
quote=GoofyNewfie quote=MT Shooter quote=djmill... (
show quote)
Was the gradual curvature on the horizon intentional?
mdorn wrote:
MT Shooter wrote:
GoofyNewfie wrote:
MT Shooter wrote:
djmills wrote:
You said "drying table." Did you print it yourself? What. Kind of equipment do you have at home? What camera. & lens did you use?
PS. GREAT work!
DJM
Yes, I do all my large prints at home. I use a HP130NR printer. Images were shot in JPG Basic with a Nikon D800E and a Sigma 24-70mm F2.8 lens at 24mm and F22.
The JPG basic was used for file size, they come out 103MB on the D800E. After processing the 4 shots into the panorama the finished file size of the Pano JPG was 347MB. It took almost 20 minutes to make the print on HP Premium Satin roll paper using HP Vivera inks.
quote=djmills You said "drying table." ... (
show quote)
So these were stitched then?
That's one heck of a tall ladder you used!
quote=MT Shooter quote=djmills You said "dr... (
show quote)
Stitched using ArcSoft's Panorama Maker Pro 5. I downloaded the free version to play with, then bought the $19.95 version when I got this gig. I tried Microsoft ICE, but it took over 1/2 hour to stitch my first attempt, and the ArcSoft free product did it in about a minute using the same originals. The Pro version resolved the pano in exactly 11 seconds.
Billings is hemmed in by sandstone cliffs over half way around it, I was on top of the cliff to the East just after sunrise for this set. I did use a CPL on these shots, was not sure it would work, but I liked the base images better than the same set shot without the CPL, it really brought out the blue sky reflection in the river. I also had a UV filter on to help with the early morning haze, it was only 38 degrees out there, and a bit breezy!
quote=GoofyNewfie quote=MT Shooter quote=djmill... (
show quote)
Was the gradual curvature on the horizon intentional?
quote=MT Shooter quote=GoofyNewfie quote=MT Sho... (
show quote)
Its actually natural as the surrounding land slopes down to the river bottom.
We are totally impressed. How about posting to the photo album as well? It's obvious you don't need any advice.
DJM
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.