Wickspics
Loc: Detroits Northwest Side. Cody High School.
Because I get my photos the way I want them, not as the camera wants to give them to me. ( To me better photos )
You are simply wrong . You could , by taking a reflected light reading off an 18 percent gray card instead of your subject come cllose on Auto to the accuracy lof a handheld incident light meter reading . Here's a suggestion : Shoot a full face and torso of someone who's back is to the sun on auto and see what you come up with . It can be done successfully but rarely if you shoot blindly on auto . Fianally , be nice . There'sno reason to be disrespectful when you disagree with someone .
Bill, what are you amening and yuping to. There is no reference to your comment. Just wondering.
Technology is wonderful and should be embraced. All modes of operation on the new cameras should be used and applied as needed. I use manual mode when I think it is needed, but never always. Great photographs can be captured in all modes. Knowledge of the differences in the various modes of the camera is necessary. I would hate to think I missed a great shot by not being familiar with my camera and was trying to figure out just which mode to use.
If my composition is based on depth of field I use AV and tweek the wheel to overide the cameras shutter settings. If the subject is all about speed (I shoot nature) then I set in TV (shutter priority) and from there I an tweek or overide the cameras settings to adjust ap. I take a shot and look at it and then go from there. I tend to like less exposure then the camera pixs for me. I try to stay in iso 100 or close by but I can get more out of my other adjusments by pushing the iso to give me more room to play. If I find I have to push iso over 400-800 then I move on to another shot.
All of this is why I shoot. It's is the unknown that takes me out there each time. I am also finding that up here in Illinois (travel for work)the nature is so much different from Florida. I have to be slower, and silent and the birds are so much smaller and faster. It makes me adjust my shooting.
Since I have been shooting film for many years I got use to manual mode. I feel if you want "control" over your images..this is the way to go. There many people that shoot in Aperture priority with much success...I guess it is what you start with and you feel comfortable with. I don't believe there is a right way or wrong way. All I say is have fun shooting.
The only time, I shoot in maual is when doing bracketet shots for HDR
Frankly, I mostly shoot AP out in the field and manual only in the studio, because I'm in control of the light and I have the time to expose properly. A few folks have said to experiment in all modes and see what works best for you... amen to that. Landscapes I would try manual, because there's time and you can play around. Street and people I would go AP/SP or Auto. Your preference. Happy shooting.
I have always wondered why too. I never use the presets. Shoot mostly in "A" aperture prioraty so I can control depth of field. Always look at screen of the first shot in differant lighting to make sure it's OK. The last time I shot M was at the moon. Sometimes you need to but I think they come up once in a Blue Moon. I notice that most who say they shoot M also shoot in RAW. Is that so they can fix the exposure. (sometimes I can't resist being caty) I too started before there were in Camera Meters. I lusted for a Nikon F with a meter. I had a Minolta SR 1 and thought I was in heaven when I got my SRT 101 with in camera metering. You folks that line up the dots to 0 in your camera are setting it just like it would set it's self. If you are using A or P and then lining up the dots. - Dave
Ok enuff of this. lets just say that those who shoot in manual know alot and those who shoot in A or S know a little more,in A I can change my S buy opening or closing the aperture ,if the scene is back lit or front lit I can use the comp dial.
gessman wrote:
I've seen repeated statements that it is better to shoot in manual mode and I have also noticed a couple of efforts to instruct users how to do it. I would like to hear some different opinions why a person should shoot manually, bearing in mind that if you are going to use the on-board camera meter for your reading and set the aperture and shutter speed by that reading, you would most likely be setting the same settings the camera would set. With that in mind, why is it better for you to set your camera than to let the camera do it for you, recognizing that the camera can and will normally do it a lot faster than you can, especially in the beginning?
My experience goes back beyond when cameras first had built-in meters so I am not asking how to shoot in manual mode, just asking why it should be done.
I've seen repeated statements that it is better to... (
show quote)
Why not check out what Bryan Petersen and Scott Kelby say on the subject?
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.